X
 A new item has been added to your Shopping Cart. You now have 0 items in your Shopping Cart.
    
Products Info
Mouse over to zoom in

OP COM 1.64 OPCOM 201008 Opel Firmware V1.64 with PIC18F458 and FTDI Chip

Item No: ATP 059 B
Unit Pirce: USD 15.00
Weight: 00.2 KG
MOQ: 1
Wholesale price:
Quantity(piece) Pirce(each) Processing Time
1 - 50 USD 15.00 3 workdays
51 - 100 USD 14.50 3 workdays
101 - 500 USD 14.00 5 workdays
Total Price:
Quantity:

Product Description

Opcom OP-COM V1.64 Can OBD2 for Opel
Software Version: 1.64
Language: English, German
Attention: Please do not use 2010 version software or try to update online for this interface,or it will get damaged, and have to return back to us for repair.
 
 
OP COM 1.64 Function:
1.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
2.The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
3.Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
4.Fault codes will be shown with all available information:
 
Opcom 201008 V Full fault code text description
 
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
 
You Can Also Run Output Tests on Many Controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
 
 
Package List:
1.OP COM Interface
2.USB Cable
3.Software and Drivers CD
 
Mainboard photo: